Oil Life Start Value - Base Instrument Cluster (IC)
WARNING: This page is about a different car, the 2014 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
All message center functions are carried out using the single stem SELECT/RESET button in the IC
.
- Press and release the SELECT/RESET button to scroll through the information displays until the message center displays HOLD RESET FOR SETUP MENU.
- Press and hold the SELECT/RESET button for approximately 2 seconds until the message center displays OIL LIFE XXX% HOLD RESET = NEW.
- Press and hold the SELECT/RESET button for approximately 2 seconds until the message center displays OIL LIFE SET TO XXX%.
-
NOTE: The oil life start value reduces by 10% for each second that the SELECT/RESET button is held once the oil life start value begins decreasing.
Continue to hold the SELECT/RESET button until the oil life begins to decrease in value (from 100% down to 10%), continuing to hold until the desired start value is displayed.
- Release the SELECT/RESET button and allow the setup timer to expire to exit the procedure.