Pinpoint Test As: The Turn Signal On Warning Chime Is Inoperative

WARNING: This page is about a different car, the 2014 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.

AS1 CHECK THE KEY-IN-IGNITION WARNING CHIME OPERATION
- Ignition OFF.
- With the ignition switch off and the key in the ignition lock cylinder, open the LH front door and observe the key-in-ignition warning chime operation.
Does the key-in-ignition warning chime operate correctly?
- Yes : GO to AS2 .
- No : INSTALL a new IPC . REFER to Instrument Panel Cluster (IPC) . TEST the system for normal operation.
AS2 CHECK THE TURN SIGNAL INDICATORS OPERATION
- Ignition ON.
- Verify the turn signal indicators operation.
Do the turn signal indicators operate correctly?
- Yes : GO to AS3 .
- No : GO to PINPOINT TEST R .
AS3 CHECK THE ODOMETER FOR CORRECT OPERATION
- Drive the vehicle and observe the odometer for correct operation.
Does the odometer operate correctly?
- Yes : INSTALL a new BCM . REFER to BODY CONTROL MODULE (BCM) . TEST the system for normal operation.
- No : GO to PINPOINT TEST H .