LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 545 (Charging System) >> Diagnosis And Testing >> Pinpoint Test >> Pinpoint Test J: Load Shed Message Displays in Message Center >> Normal Operation

Normal Operation

WARNING: This page is about a different car, the 2014 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.

When the engine is off and the key is in on or accessory mode, and the BCM  determines the battery state of charge is below 50%, or 45 minutes have elapsed, a load shed message is sent over the CAN  . This message turns off the audio/navigation system to save the remaining battery charge. Under this condition the a load shed message will be displayed to notify the driver that battery protection actions are active:

This pinpoint test is intended to diagnose the following: