Connecting Rod to Crankshaft Side Clearance
WARNING: This page is about a different car, the 2014 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
SPECIAL TOOL DESCRIPTION
|
|
Feeler Gauge Set
303-D027
(D81L-4201-A) or equivalent |
NOTE:
Refer to the appropriate Engine article
for the specification.
- Using the Feeler Gauge Set, measure the clearance between the connecting rod and the crankshaft. Verify the measurement is within specification.
Courtesy of FORD MOTOR CO.