LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 540 (Engine Mechanical - 6.2L (2V)) >> In-Vehicle Repair >> Oil Cooler >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2014 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
  1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to JACKING & LIFTING .
  2. Drain the engine cooling system. For additional information, refer to ENGINE COOLING .
  3. Remove and discard the oil filter.
  4. Disconnect the oil cooler coolant hose quick connect couplings and position aside. For additional information, refer to FUEL SYSTEM - GENERAL INFORMATION .
  5. NOTE: If metal foreign material is present in the oil cooler, mechanical concerns exist. To diagnose mechanical concerns, refer to ENGINE SYSTEM - GENERAL INFORMATION .

    Remove the threaded shaft and the oil cooler. Inspect the engine oil cooler.

scientia non olet · About LEMON Manuals