LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 540 (Engine Mechanical - 6.2L (2V)) >> In-Vehicle Repair >> Flexplate >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2014 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the transmission. For additional information, refer to AUTOMATIC TRANSAXLE/TRANSMISSION - 6R80 .
  2. Rotate the engine clockwise until the 2 slotted holes on the flexplate are at the 6 o'clock position as shown in illustration.
    Fig 1: Locating Flexplate Slotted Holes
    G06518277Courtesy of FORD MOTOR CO.
  3. Remove the 8 bolts and the flexplate.
    • Discard the 8 flexplate bolts.
scientia non olet · About LEMON Manuals