LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 539 (Engine Mechanical - 5.0L (4V)) >> In-Vehicle Repair >> Oil Cooler >> Installation

Oil Cooler: Installation

WARNING: This page is about a different car, the 2014 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the oil cooler and threaded insert.
    • Tighten to 57 Nm (42 lb-ft).
      G07960652
  2. Connect the 2 coolant hoses.
    • Release the hose clamp pliers.
      G07960651
  3. NOTE: Do not lubricate the O-ring seal.

    Install a new oil filter.

    • Tighten to 16 Nm (142 lb-in).
scientia non olet · About LEMON Manuals