Oil Cooler: Installation
WARNING: This page is about a different car, the 2014 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
- Align the oil cooler to the oil filter adapter and tighten the oil cooler insert bolt.
- Connect the 2 coolant hoses to the engine oil cooler and remove the hose clamp pliers.
-
NOTE: Do not lubricate the engine oil filter gasket.
Install a new engine oil filter.
- Tighten to 5 Nm (44 lb-in) and then rotate an additional 180 degrees.
- Inspect and adjust the coolant level in the degas bottle.
- Inspect and adjust the engine oil level.