Crankshaft Pulley: Removal

WARNING: This page is about a different car, the 2014 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.

With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to JACKING & LIFTING .
Remove the Air Cleaner (ACL) outlet pipe and the RH & LH ACL pipe-to-turbocharger pipes. Remove the LH turbocharger-to-Charge Air Cooler (CAC) tube and the CAC -to-Throttle Body (TB) pipe. For additional information, refer to Intake Air System Components - Exploded View, 3.5L Gasoline Turbocharged Direct Injection (GTDI) in INTAKE AIR DISTRIBUTION AND FILTERING .
Remove the accessory drive belt and the A/C belt. For additional information, refer to ACCESSORY DRIVE .
Using the Strap Wrench, remove the crankshaft pulley bolt and washer.
- Discard the bolt.
  
  Fig 1: Removing Crankshaft Pulley Bolt And Washer
  Courtesy of FORD MOTOR CO.
Using the 3 Jaw Puller, remove the crankshaft pulley.

Fig 2: Removing Crankshaft Pulley
Courtesy of FORD MOTOR CO.