Wheel Knuckle: Installation

WARNING: This page is about a different car, the 2014 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.

If necessary.
- Tighten to 17 Nm (150 lb-in).
- Tighten to 175 Nm (129 lb-ft).
- Tighten to 115 Nm (85 lb-ft).
- Tighten to 12 Nm (106 lb-in).
- Tighten to 12 Nm (106 lb-in).
- Tighten to 115 Nm (85 lb-ft).
Install the wheel bearing and wheel hub. Refer to WHEEL BEARING AND WHEEL HUB .