General Specifications
WARNING: This page is about a different car, the 2014 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
GENERAL SPECIFICATIONS
| Item |
Specification |
| Drive pinion flange runout |
0.25 mm (0.010 in) |
| Maximum allowable driveshaft runout |
0.50 mm (0.020 in) |
| Minimum Traction-Lok breakaway torque |
27 Nm (20 lb-ft) |
| U-joint operating angle |
0.5°-3.0° |