Rear Ride Height Measurement (SVT Raptor)

WARNING: This page is about a different car, the 2014 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Rear Ride Measurement Height (SVT Raptor)

Courtesy of FORD MOTOR CO.

Item	Description
1	Ride height
2	Rear frame rail
3	Top of the rear axle tube

NOTE: Make sure that the vehicle is positioned on a flat, level surface.

Jounce front and rear suspension vigorously to allow the vehicle to settle.
Before measuring ride height check:
- Tires are inflated to the correct pressure.
- Vehicle should have at least one-half tank of fuel.
- All fluids at proper levels
- No cargo inside the cab or bed.
- Inspect for aftermarket equipment.
  - Check for aftermarket changes to the steering, suspension, wheel and tire components (such as competition, heavy duty, etc.).
Measure the distance between the rear frame rail (Item 2) and the top of the rear axle tube (Item 3) to obtain the rear ride height (Item 1).