Safety Belt Buckle - Front, Center
WARNING: This page is about a different car, the 2014 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
For information on Ford Color Coded Illustrations refer to COLOR-CODING - FORD
.
| Item | Part Number | Description |
|---|---|---|
| 1 | 611B70 | Safety belt buckle |
| 2 | - | Safety belt buckle bolt (part of 611B70) |
| 3 | 61708 | Front center seat base frame |
WARNING:
All safety belt components must be inspected and corrected as part of any collision repair. Inspect all safety belt components as prescribed by SAFETY BELT INSPECTION AND REPAIR AFTER A COLLISION . Failure to follow this instruction may result in incorrect operation of the safety belt system and increase the risk of serious personal injury or death in a crash.
- Remove the front center seat. For additional information, refer to the Removal and Installation portion of SEATING .
- Remove the LH side shield. For additional information, refer to the Front Center Seat Exploded View procedure in the Removal and Installation portion of SEATING .
- Remove the bolt and safety belt buckle.
- To install, tighten to 45 Nm (33 lb-ft).
-
NOTE: Before installation, make sure the safety belt webbing is not twisted and the safety belts and buckles are accessible to the occupants.
To install, reverse the removal procedure.
- Check the active restraint system for correct operation. For additional information, refer to the appropriate FUNCTIONAL TEST procedure in SAFETY BELT SYSTEM .