P2510 - ECM / Pcm Power Relay Sense Circuit Range/Performance
WARNING: This page does not describe the selected car, but rather 28 other vehicles, including the 2014 Lincoln Navigator, 2014 Lincoln MKZ, 2014 Lincoln MKX, 2014 Lincoln MKT, and 2014 Lincoln MKS. However, it is still accessible from the selected car via links, so may be relevant.
P2510 - ECM / PCM POWER RELAY SENSE CIRCUIT RANGE/PERFORMANCE
| Description: The ISP-R and the INJPWRM circuits are monitored for correlation. This DTC sets when the voltage on the ISP-R and the INJPWRM circuit voltages do not correspond for a calibrated period of time. | |||
Possible Causes:
|
|||
| Diagnostic Aids: The INJPWRM PID voltage reading should be 0 volts when the ignition is in the OFF, ACC or LOCK position. | |||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST B: POWERTRAIN CONTROL MODULE (PCM) POWER RELAY . | ||