LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 510 (Engine Controls - Powertrain DTC Charts & Descriptions (Except Diesel & Hybrid)) >> DTC Diagnosis >> P0704 - Clutch Switch Input Circuit

P0704 - Clutch Switch Input Circuit

WARNING: This page does not describe the selected car, but rather 28 other vehicles, including the 2014 Lincoln Navigator, 2014 Lincoln MKZ, 2014 Lincoln MKX, 2014 Lincoln MKT, and 2014 Lincoln MKS. However, it is still accessible from the selected car via links, so may be relevant.
P0704 - CLUTCH SWITCH INPUT CIRCUIT

Description:  When the clutch pedal is applied the voltage switches to low. This DTC sets if the PCM does not see the clutch pedal voltage change from high to low.
Possible Causes: 
  • CPP circuit short to voltage
  • Damaged clutch pedal position (CPP) switch
  • SIGRTN circuit open
Diagnostic Aids:  When the clutch pedal is applied and then released, the clutch pedal switch voltage should cycle.
Application  Key On Engine Off  Key On Engine Running  Continuous Memory 
All GO to PINPOINT TEST TA: CLUTCH PEDAL POSITION (CPP) SWITCH .
scientia non olet · About LEMON Manuals