P0125 - Insufficient Coolant Temperature For Closed Loop Fuel Control
WARNING: This page does not describe the selected car, but rather 28 other vehicles, including the 2014 Lincoln Navigator, 2014 Lincoln MKZ, 2014 Lincoln MKX, 2014 Lincoln MKT, and 2014 Lincoln MKS. However, it is still accessible from the selected car via links, so may be relevant.
P0125 - INSUFFICIENT COOLANT TEMPERATURE FOR CLOSED LOOP FUEL CONTROL
| Description: This DTC sets when the engine coolant temperature (ECT) or the cylinder head temperature (CHT) sensor has not achieved the required temperature level to enter closed loop operating conditions within a specified amount of time after starting the engine. | |||
Possible Causes:
|
|||
| Diagnostic Aids: Compare the thermostat specification to the actual engine coolant temperature using the engine temperature PID (ECT or CHT). The temperature reading should be similar when the engine is at a normal operating temperature. | |||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| Edge 2.0L, Escape 2.0L, Explorer 2.0L, Fiesta, Focus, Fusion 1.5L, Fusion 1.6L, Fusion 2.0L, MKT 2.0L, MKZ 2.0L, Taurus 2.0L, Transit Connect 1.6L |
GO to PINPOINT TEST DX: ENGINE COOLANT TEMPERATURE (ECT) SENSOR . | ||
| All others | GO to PINPOINT TEST DL: CYLINDER HEAD TEMPERATURE (CHT) SENSOR . | ||