P0098 - Intake Air Temperature Sensor 2 Circuit High
WARNING: This page does not describe the selected car, but rather 28 other vehicles, including the 2014 Lincoln Navigator, 2014 Lincoln MKZ, 2014 Lincoln MKX, 2014 Lincoln MKT, and 2014 Lincoln MKS. However, it is still accessible from the selected car via links, so may be relevant.
P0098 - INTAKE AIR TEMPERATURE SENSOR 2 CIRCUIT HIGH
| Description:
This DTC sets when the intake air temperature 2 (IAT2) sensor signal is greater than the self-test maximum. The IAT2 sensor maximum is 4.6 volts. |
|||
Possible Causes:
|
|||
| Diagnostic Aids: Monitor the IAT2 sensor PID value. A typical IAT2 sensor temperature should be greater than the IAT sensor temperature. | |||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| Explorer 3.5L GTDI, F-150 3.5L, Flex 3.5L GTDI, MKS 3.5L, MKT 3.5L, Taurus 3.5L GTDI |
GO to PINPOINT TEST DN: PRESSURE AND TEMPERATURE SENSORS . | ||
| All others | GO to PINPOINT TEST DU: INTAKE AIR TEMPERATURE 2 (IAT2) SENSOR . | ||