P0096 - Intake Air Temperature Sensor 2 Circuit Range/Performance (Bank 1)
WARNING: This page does not describe the selected car, but rather 28 other vehicles, including the 2014 Lincoln Navigator, 2014 Lincoln MKZ, 2014 Lincoln MKX, 2014 Lincoln MKT, and 2014 Lincoln MKS. However, it is still accessible from the selected car via links, so may be relevant.
P0096 - INTAKE AIR TEMPERATURE SENSOR 2 CIRCUIT RANGE/PERFORMANCE (BANK 1)
| Description: This DTC sets when the intake air temperature 2 (IAT2) sensor PID does not correlate with the charge air cooler temperature (CAC_T) sensor or the intake air temperature (IAT) sensor PIDs at ignition ON. It also sets if the IAT2 sensor PID exceeds the maximum calibrated temperature threshold while driving. | |||
Possible Causes:
|
|||
| Diagnostic Aids: The MAP/IAT2 sensor is located on top of the intake manifold. Aftermarket heaters that are attached to the engine, transmission or battery may cause DTC P0096 to set in cold weather climates after a 6 hour soak period. | |||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST EA: PRESSURE AND TEMPERATURE SENSOR CORRELATION . | ||