LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 507 (Engine Controls - Description & Operation (Except Diesel & Hybrid)) >> Engine Control Components >> Evaporative Emission (EVAP) Canister Vent Valve

Evaporative Emission (EVAP) Canister Vent Valve

WARNING: This page does not describe the selected car, but rather 28 other vehicles, including the 2014 Lincoln Navigator, 2014 Lincoln MKZ, 2014 Lincoln MKX, 2014 Lincoln MKT, and 2014 Lincoln MKS. However, it is still accessible from the selected car via links, so may be relevant.

The EVAP canister vent valve (located near the EVAP canister) is part of the enhanced EVAP system controlled by the PCM. During the EVAP leak check monitor, the EVAP canister vent valve seals the EVAP canister from the atmospheric pressure. This allows the EVAP purge valve to achieve the target vacuum in the fuel tank during the EVAP leak check monitor.

Fig 1: Identifying Evaporative Emission Canister Vent Valve
G06053856Courtesy of FORD MOTOR CO.