Component testing procedure
WARNING: This page is about a different car, the 2013 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
COMPONENT TESTING PROCEDURE
| Circuit to test | Connect self-powered test light or ohmmeter to terminals | Move switch to these positions | A good switch will indicate |
|---|---|---|---|
| Switch lock | C535B 1 and C535B4 | Lock Off | Closed circuit |
| Lock On | Open circuit | ||
| Left front window circuit | C535B 1 and C535A4 | Up | Closed circuit |
| C535B 1 and C535A8 | Down | Closed circuit | |
| C535B 1, C535A4 and C535A8 | One-Touch Up/Down | Closed circuit | |
| Right front window circuit | C535B 1 and C535A6 | Up | Closed circuit |
| C535B 1 and C535A2 | Down | Closed circuit | |
| Left rear window circuit | C535B 1 and C535B5 | Up | Closed circuit |
| C535B 1 and C535B6 | Down | Closed circuit | |
| Right rear window circuit | C535B 1 and C535B7 | Up | Closed circuit |
| C535B 1 and C535B8 | Down | Closed circuit |