LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 490 (Body Panel System - Body Closures) >> Removal And Installation >> Door Check Arm >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2013 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front door trim panel. For additional information, refer to INTERIOR TRIM AND ORNAMENTATION .
  2. Remove the door check arm bolts.
    • To install, tighten to 9 Nm (80 lb-in).
  3. Remove the nuts and the door check arm.
    • To install, tighten to 9 Nm (80 lb-in).
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals