LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 487 (Exterior Trim & Ornamentation) >> Removal And Installation >> Roof Ditch Moulding >> Removal

Roof Ditch Moulding: Removal

WARNING: This page is about a different car, the 2013 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: Before beginning any service procedure, refer to SAFETY WARNINGS . Failure to follow this instruction may result in serious personal injury.
NOTE: Removal steps in this procedure may contain installation details.
  1. Both sides.
    G08646564
  2. If required.
    G08646565
  3. NOTE: To prevent potential corrosion, if installing a new rivet, paint the replacement rivet after installation and apply sealer to the joint at the rivet.

    If required.

    G08646566