LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 487 (Exterior Trim & Ornamentation) >> Removal And Installation >> Rocker Panel Moulding >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2013 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the 2 front rocker panel moulding-to-fender pin-type retainers.
  2. Remove and discard the 8 rocker panel pin-type retainers.
  3. Using a suitable tool, release the 8 hidden pin-type retainers and remove the rocker panel moulding.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals