LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 482 (Climate Control System) >> Removal And Installation >> Blower Motor >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2013 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the blower motor speed control electrical connector.
  2. Disconnect the blower motor electrical connector.
  3. Remove the 3 blower motor screws.
  4. Remove the blower motor.
  5. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals