LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 481 (Windows And Glass - Glass, Frames And Mechanisms) >> Diagnosis And Testing >> Glass, Frames and Mechanisms >> Pinpoint Tests >> Pinpoint Test B: A Single Power Window is Inoperative - RH Front >> Normal Operation

Normal Operation

WARNING: This page is about a different car, the 2013 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.

Under normal operation, the RH front power window motor receives high current power at all times through circuit SBB29 (GY/RD). Ground is provided to the RH front power window motor through circuit GD139 (BK/YE). The RH front power window motor receives low current power from the accessory delay relay through circuit CBP41 (BU). Voltage is supplied to the LH and RH front window control switch through circuit CBP41 (BU). When the LH front or RH front window control switch is operated in the UP position, the RH front window motor receives a voltage signal through circuit CPW13 (BN/YE). When the RH front or LH front window control switch is operated in the DOWN position, the RH front window motor receives a voltage signal through circuit CPW12 (GN/OG).

This pinpoint test is intended to diagnose the following: 

scientia non olet · About LEMON Manuals