LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 48 (Four Wheel Drive (4WD) Systems -- F250-F550 Super Duty) >> Removal And Installation >> Hublock Vacuum Solenoid >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2012 Ford Pickup, 2012 Ford F550 Super Duty, 2012 Ford F450 Super Duty, and 2012 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the Constant Vacuum Hublock (CVH) solenoid electrical connector.
  2. Disconnect the vacuum hoses from the CVH solenoid.
  3. Depress the CVH solenoid locking tab and remove the CVH solenoid.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals