LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 479 (Fuel Tank & Fuel Lines) >> Removal And Installation >> Fuel Level Sender >> 3.7L shown, others similar >> Installation

3.7L shown, others similar: Installation

WARNING: This page is about a different car, the 2013 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the fuel level sender onto the FP module.
  2. Position the wires into the retention clip.
  3. Connect the fuel level sender electrical connector.
  4. Install the FP module. For additional information, refer to FUEL PUMP MODULE .
scientia non olet · About LEMON Manuals