LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 477 (Anti-Theft System - Passive Anti-Theft System) >> Diagnosis And Testing >> Anti-Theft >> Pinpoint Tests >> Pinpoint Test H: The Vehicle Does Not Start >> Normal Operation

Normal Operation

WARNING: This page is about a different car, the 2013 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.

During each vehicle start sequence, when the key is turned to the START or ON position, the Passive Anti-Theft System (PATS) transceiver reads the PATS key identification code and sends the data to the Instrument Panel Cluster (IPC). If there is a PATS concern, PATS DTCs should be set in the IPC and DTC P1260 in the PCM. If it is due to a starting system or driveability concern, there is no PATS DTCs in the IPC or the DTC P1260 in the PCM.

This pinpoint test is intended to diagnose the following: