LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 474 (Engine Emission Control System) >> Removal And Installation >> Positive Crankcase Ventilation (PCV) Valve >> 5.8L (4V) Engine >> Installation

5.8L (4V) Engine: Installation

WARNING: This page is about a different car, the 2013 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
  1. NOTE: If equipped, make sure the PCV valve electrical connector is pointing in the correct position to allow the wiring harness to be connected. Incorrect installation would require removal and replacement of the valve.

    Install a new PCV valve and O-ring seal.

  2. Connect the crankcase ventilation tube-to-PCV valve quick connect coupling, refer to FUEL SYSTEM - GENERAL INFORMATION .
  3. If equipped, connect the PCV valve electrical connector.
scientia non olet · About LEMON Manuals