LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 470 (Engine Cooling System) >> Removal And Installation >> Cooling Fan Motor and Shroud - 5.8L (4V)

Cooling Fan Motor and Shroud - 5.8L (4V)

WARNING: This page is about a different car, the 2013 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the Air Cleaner (ACL) assembly. Refer to INTAKE AIR DISTRIBUTION & FILTERING .
  2. G08643854
    • To install, tighten to 8 Nm (71 lb-in).
      G08643855
    2. To install, tighten to 8 Nm (71 lb-in).
      G08643856
    1. To install, tighten to 8 Nm (71 lb-in).
      G08643857
  6. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals