Normal Operation
WARNING: This page is about a different car, the 2013 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
The engine cooling system is a closed system providing for coolant expansion and contraction as well as changes in pressure as coolant warms and cools with engine operation. Various gaskets, seals, hoses and clamps contain coolant within the cooling system and keep other fluids and contaminants from entering the cooling system.
Coolant loss can be attributed to external or internal leaks anywhere within the cooling system.
For engine specific information, refer to ENGINE COOLING .
This pinpoint test is intended to diagnose the following:
- Coolant hoses or tubes
- Hose clamps
- Thermostat O-ring seal
- Coolant pump O-ring seal or gasket
- Thermostat housing
- Radiator
- Pressure relief cap
- Coolant pump leaking from weep hole
- Heater core
- Engine gaskets (may leak internally or externally)
- Oil filter adapter (5.8L engine) (may leak internally or externally)
- Oil cooler (Boss® 302 and 5.8L engines) (may leak internally or externally)
- Degas bottle
- Cylinder block core plugs
- Cylinder head core plugs
- Block heater (if equipped)
- ECT sensor (5.8L engine)