LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 462 (Information System And Entertainment System) >> Removal And Installation >> Video Cable >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2013 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the Audio Front Control Module (ACM). For additional information, refer to AUDIO CONTROL MODULE (ACM) .
  2. Remove the video cable.
  3. To install, reverse the removal procedure.
    • Secure the video cable using tape or zip-ties, as necessary.