LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 462 (Information System And Entertainment System) >> Removal And Installation >> Steering Wheel Controls >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2013 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the driver air bag module. For additional information, refer to SUPPLEMENTAL RESTRAINT SYSTEM .
  2. Using a suitable tool such as a flat-bladed screwdriver, pry the steering wheel controls from the steering wheel.
    • Disconnect the electrical connector.
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals