LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 462 (Information System And Entertainment System) >> Removal And Installation >> Audio Amplifier >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2013 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the LH lower A-piller trim panel. For additional information, refer to INTERIOR TRIM AND ORNAMENTATION .
  2. Remove the 3 nuts and the audio amplifier.
    • Disconnect the 2 electrical connectors.
    • To install, tighten to 3 Nm (27 lb-in).
      G08646121
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals