Voice Recognition (With Navigation And/Or SYNC®)

WARNING: This page is about a different car, the 2013 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.

When the audio system enters voice recognition mode, the ACM initially controls the voice recognition feature. The microphone is wired directly to the APIM, which relays the microphone input to the ACM through dedicated wiring. If the first command spoken is part of the ACM voice recognition set, the ACM retains control of the voice recognition and takes the appropriate action(s). If the first command spoken is part of the APIM voice recognition set, the ACM shuts off its own voice recognition and broadcasts a Controller Area Network (CAN) message to the APIM, which transfers the spoken voice command to the SYNC® system. The ACM controls the voice engine for the base audio, navigation, and climate control systems. The APIM controls the voice engine for the SYNC® system (USB port, audio input jack, Bluetooth).