Starter Motor - 3.7L: Removal
WARNING: This page is about a different car, the 2013 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
Always disconnect the battery ground cable at the battery before disconnecting the starter motor battery terminal lead. If a tool is shorted at the starter motor battery terminal, the tool can quickly heat enough to cause a skin burn. Failure to follow this instruction may result in serious personal injury.
- With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to JACKING & LIFTING .
- Disconnect the battery ground cable. For additional information, refer to BATTERY, MOUNTING AND CABLES .
- Remove the starter solenoid terminal cover.
- Remove the 2 starter solenoid terminal nuts and position aside the wires.
- If equipped, remove the nut and position the automatic transmission cooler tube bracket aside.
- Remove the 2 stud bolts and the starter motor.