LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 460 (Automatic Transmission External Controls) >> Removal And Installation >> Brake Shift Interlock Actuator >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2013 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
  1. NOTE: The Brake Shift Interlock Actuator (BSIA) is not serviced separately. If a new BSIA is required, install a new transmission selector lever assembly.

    For additional information, refer to SELECTOR LEVER .

scientia non olet · About LEMON Manuals