LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 460 (Automatic Transmission External Controls) >> Diagnosis And Testing >> External Controls >> Pinpoint Tests >> Pinpoint Test C: DTC P0815, P0816 >> Normal Operation and Fault Conditions

Normal Operation and Fault Conditions

WARNING: This page is about a different car, the 2013 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.

The SelectShift™ switch is a toggle switch integral to the selector lever knob. When the selector lever is placed in the sport mode position, the upshift/downshift feature becomes activated. If a new switch is required install a new selector lever knob.

DTC FAULT TRIGGER CONDITIONS

DTC Description Fault Trigger Conditions
P0815 Upshift Switch Circuit Sets when a open or short circuit to the upshift switch occurs.
P0816 Downshift Switch Circuit Sets when a open or short circuit to the downshift switch occurs.