Removal and Installation

WARNING: This page is about a different car, the 2013 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.

Remove the door latch. For additional information, refer to DOOR LATCH .
Press the tab and pull the cable housing away from the latch.
- Unhook the cable from the latch lever.
  
  Fig 1: Locating Cable Housing Tab
  Courtesy of FORD MOTOR CO.
To install, reverse the removal procedure.
- After installation, carry out the DOOR HANDLE TO LATCH ROD ADJUSTMENT . For additional information, refer to DOOR HANDLE TO LATCH ROD ADJUSTMENT .