LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 434 (Exterior Lighting System) >> Removal And Installation >> Parking Lamp - Front >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2013 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
  1. For the LH front parking/turn lamp on vehicles equipped with High Intensity Discharge (HID) headlamps, remove the air cleaner. For additional information, refer to INTAKE AIR DISTRIBUTION & FILTERING .
  2. Rotate the bulb holder approximately one-eighth turn counterclockwise and remove the front parking/turn lamp bulb from the headlamp assembly.
    • Disconnect the electrical connector.
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals