Removal and Installation

WARNING: This page is about a different car, the 2013 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.

Remove the steering column opening trim panel. For additional information, refer to INSTRUMENT PANEL AND CONSOLE .
Remove the screw and the headlamp switch bezel.
- Disconnect the electrical connectors.
NOTE: The 3 retaining tabs on the headlamp switch are located at approximately the 3, 6 and 11 o'clock positions when viewed from the front.

Release the 3 tabs and remove the headlamp switch from the bezel.
To install, reverse the removal procedure.