LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 434 (Exterior Lighting System) >> Removal And Installation >> Headlamp Assembly >> Removal

Headlamp Assembly: Removal

WARNING: This page is about a different car, the 2013 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front bumper cover. For additional information, refer to BUMPERS .
  2. Remove the pin-type retainer.
  3. Remove the 3 bolts and the headlamp assembly.
    • Disconnect the electrical connectors.
    • To install, tighten the bolts to 8 Nm (71 lb-in).
scientia non olet · About LEMON Manuals