Support Braces - Rear: Removal
WARNING: This page is about a different car, the 2013 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
The 2 rear support braces must be removed and installed at the same time.
NOTE:
Pay particular attention to the location of bolts removed to aid in installation.
- With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to JACKING & LIFTING .
- Remove and discard the 4 rear support brace bolts (rear).
- Remove and discard the 2 rear support brace bolts (upper).
- Remove and discard the 8 rear support brace bolts (front).
- Remove and discard the 2 rear support brace bolts (center to frame), and remove the 2 rear support braces.