LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 428 (Rear Suspension) >> Removal And Installation >> Shock Absorber - GT500 >> Installation

Shock Absorber - GT500: Installation

WARNING: This page is about a different car, the 2013 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Tighten the shock absorber lower bolt while the suspension is at curb height or bushing damage and incorrect clamp load may occur.
  1. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals