LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 427 (Accessory Drive Belt) >> Removal And Installation >> Supercharger Belt Tensioner >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2013 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
  1. Rotate the Supercharger (SC) belt tensioner clockwise and remove the SC belt from the SC pulley.
  2. NOTE: The SC belt is routed behind the SC belt tensioner.

    Remove the SC belt tensioner bolt and tensioner.

    • To install, tighten to 48 Nm (35 lb-ft).
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals