Removal and Installation
WARNING: This page is about a different car, the 2012 Ford Pickup, 2012 Ford F550 Super Duty, 2012 Ford F450 Super Duty, and 2012 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
All vehicles
- Remove the instrument panel center finish panel. For additional information, refer to
INSTRUMENT PANEL AND CONSOLE
.
Vehicles with trailer brakes
- Using a suitable tool (such as a small screwdriver), press the retaining tab at the top and remove the Trailer Brake Control (TBC) module.
Vehicles without trailer brakes
- Using a suitable tool (such as a small screwdriver), press the 4 retaining tabs and remove the storage bin.
All vehicles
- Using a suitable tool (such as a small screwdriver), press the 4 retaining tabs and remove the upfitter switch.
- To install, reverse the removal procedure.