LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 394 (Anti-Theft System - Passive Anti-Theft System) >> Diagnosis And Testing >> Anti-Theft >> Pinpoint Tests >> Pinpoint Test A: DTC B10D7:05 >> Normal Operation

Normal Operation

WARNING: This page is about a different car, the 2013 Ford F-550 Super Duty, 2013 Ford F-450 Super Duty, 2013 Ford F-350 Super Duty, and 2013 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.

When the Body Control Module (BCM) enters a key programming state, it activates the transceiver to read the key in the ignition. If a valid Passive Anti-Theft System (PATS) key is used and there are no concerns with the PATS the key is programed into the BCM memory.

This pinpoint test is intended to diagnose the following: