LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 385 (Fuel Charging System & Fuel Control System - 6.7L) >> Removal And Installation >> Fuel Injector Supply Tube >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2013 Ford F-550 Super Duty, 2013 Ford F-450 Super Duty, 2013 Ford F-350 Super Duty, and 2013 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Whenever a fuel injector supply tube fitting is loosened, a new fuel injector supply tube must be installed. The steps required to remove and install a fuel injector supply tube are included in the fuel injector procedure. For additional information, refer to FUEL INJECTORS .
scientia non olet · About LEMON Manuals