LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 384 (HVAC - Climate Control System (Service Information)) >> Removal And Installation >> Register - Passenger Side >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2013 Ford F-550 Super Duty, 2013 Ford F-450 Super Duty, 2013 Ford F-350 Super Duty, and 2013 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Lower the glove compartment.
  2. Detach the 2 lower passenger side register retaining tabs and tilt the register outward.
  3. Grasp the sides of the passenger side register housing through the opening between the register vanes and pull the register rearward to disengage to 2 upper retaining tabs.
  4. Remove the passenger side register.
  5. To install, reverse the removal procedure.