Clutch and Clutch Field Coil: Removal

WARNING: This page is about a different car, the 2013 Ford F-550 Super Duty, 2013 Ford F-450 Super Duty, 2013 Ford F-350 Super Duty, and 2013 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.

Remove the A/C compressor. For additional information, refer to AIR CONDITIONING (A/C) COMPRESSOR - 6.2L AND 6.8L or AIR CONDITIONING (A/C) COMPRESSOR - 6.7L DIESEL .
Remove the A/C clutch disc and hub bolt.
1. Using the Compressor Clutch Holding Tool, hold the A/C clutch disc and hub.
2. Remove the A/C clutch disc and hub bolt.
  
  Fig 1: Holding A/C Clutch Disc And Hub Using Compressor Clutch Holding Tool
  Courtesy of FORD MOTOR CO.
Remove the A/C clutch disc and hub.
Remove the A/C compressor pulley snap ring.
NOTE: Do not use air tools. Damage to the Air Conditioning (A/C) clutch pulley or A/C compressor may result.

Remove the A/C compressor pulley.
1. Install the Compressor Pulley Remover.
2. Using the Compressor Pulley Remover, remove the A/C compressor pulley.
  
  Fig 2: Identifying A/C Compressor Pulley And Compressor Pulley Remover
  Courtesy of FORD MOTOR CO.
Remove the A/C clutch field coil snap ring.
Remove the A/C clutch field coil electrical connector bracket screw.
Remove the A/C clutch field coil.